Soda Making Machinery - For PET Bottles - Low Investment
Prominent & Leading Manufacturer from Coimbatore, we offer soda soft drink machine pnematically opearated, soda soft drink machine manually opearated, table top soda soft drink maker and ultra violet filter.
The Machine is a one man Factory for making Soda and Soft drinks. Since this machine is pneumatically operated, it is easy to use and convenient. It requires an air compressor of 1.5 Hp. Approximately 4000 bottles can be made a in shift of 8 hours. It consists of the following main components
Pump : It is a three piston pump with a capacity to pump approx. 450 liters per minute. A motor of ½ Hp is provided for the pump. The pumped water is fed into the Carbonator through a series of non-return valves. The fixed pumping speed ensures that the proper quantity of water is fed to the Carbonator and in turn the carbonating ratio between water and Co2 is maintained.
Pressure Regulating Valve : The PRV ensures that a fixed pressure of Co2 is fed into the Carbonator. In effect it is the heart of the machine and its maintenance and normal functioning is vital to the machine and quality of drink. The PRV can be adjusted for various pressures according to the soda/soft drink being made.
Carbonator : The Carbonator tank is made of stainless steel and houses a shower and series of SS plates. Gas and water are mixed in the tank. The shower and special SS plates inside ensure that the water passing through it is saturated thoroughly thereby ensuring optimum carbonation.
Filling head : A Pneumatic cylinder is fitted for the filling and crowning operation. First a crown cork is fixed inside the head. Then a bottle is kept on the bottle table. The Filling lever is pressed & soda flows into the bottle through a filling valve. To eliminate the air inside the bottle, a snifting valve is provided. Thus when the bottle is being filled, the air is eliminated through the snift valve. Due to this, some amount of soda also flows out through the snift valve. This is unavoidable. When the bottle is full, the filling lever is released and the crown corking lever is pressed which operates another pneumatic cylinder. The bottle is then removed and the next crown cork and bottle are kept and the whole process is repeated.
Stand : This is the main pillar of the machine. The Carbonator, pump, filling head and motor are all fitted onto it. The stand is made of Cast Iron thus ensuring a long life.
Motor : The motor is 1/2 HP either single phase or thee phase. This is a 1440- RPM motor. This RPM ensures that a fixed quantity of water is pumped into the Carbonator ensuring optimum carbonation.
To make Soft drinks : The syrup concentrate is previously filled into the bottle. The bottle is then kept on the machine and soda filled. The force with which the soda flows into the bottle (since soda is flowing from a higher pressure inside the carbonator to the atmospheric pressure of the bottle) ensures that the previously filled syrup mixes with the soda and the soft drink is ready. This method of making soft drink is called Post mix system.
Accessories supplied with the machine : A detailed catalog of the machine: An exploded view of each section of the machine helps in the maintenance and spares parts ordering. A separate section is devoted to the fault finding procedure for each section of the machine wherein are explained the various reasons of a complaint and the methods to tackle such problems.
A complete spanner set along with special spanners, tools and oil can are provided.
An extra set of washers is provided with the machine.
The Machine is a one man Factory for making Soda and Soft drinks. Approximately 4000 bottles can be made in shift of 8 hours. It consists of the following main components:
Pump : It is a three piston pump with a capacity to pump approx. 450 liters per minute. A motor of ½ Hp is provided for the pump. The pumped water is fed into the Carbonator through a series of non-return valves. The fixed pumping speed ensures that the proper quantity of water is fed to the Carbonator and in turn the carbonating ratio between water and Co2 is maintained.
Pressure Regulating Valve : The PRV ensures that a fixed pressure of Co2 is fed into the Carbonator. In effect it is the heart of the machine and its maintenance and normal functioning is vital to the machine and quality of drink. The PRV can be adjusted for various pressures according to the soda/soft drink being made.
Carbonator : The Carbonator tank is made of stainless steel and houses a shower and series of SS plates. Gas and water are mixed in the tank. The shower and special SS plates inside ensure that the water passing through it is saturated thoroughly thereby ensuring optimum carbonation.
Filling head : First a crown cork is fixed inside the head. Then a bottle is kept on the bottle table. On lifting of a lever, soda flows into the bottle through a filling valve. To eliminate the air inside the bottle, a snifting valve is provided. Thus when the bottle is being filled, the air is eliminated through the snift valve. Due to this, some amount of soda also flows out through the snift valve. This is unavoidable. When the bottle is full, the lever is released and the foot pedal pressed for capping the bottle. The bottle is then removed and the next crown cork and bottle are kept and the whole process is repeated.
Stand : This is the main pillar of the machine. The Carbonator, pump, filling head and motor are all fitted onto it. The stand is made of Cast Iron thus ensuring a long life.
Motor : The motor is 1/2 HP either single phase or thee phase. This is a 1440- RPM motor. This RPM ensures that a fixed quantity of water is pumped into the Carbonator ensuring optimum carbonation.
To make Soft drinks : The syrup concentrate is previously filled into the bottle. The bottle is then kept on the machine and soda filled. The force with which the soda flows into the bottle (since soda is flowing from a higher pressure inside the carbonator to the atmospheric pressure of the bottle) ensures that the previously filled syrup mixes with the soda and the soft drink is ready. This method of making soft drink is called Post mix system.
Accessories supplied with the machine: A detailed catalog of the machine: An exploded view of each section of the machine helps in the maintenance and spares parts ordering. A separate section is devoted to the fault finding procedure for each section of the machine wherein are explained the various reasons of a complaint and the methods to tackle such problems.
A complete spanner set along with special spanners, tools and oil can are provided.
An extra set of washers is provided with the machine.
Request Callback
Send Business Enquiry
Table top soda soft drink maker
Ask For Price
Product Price :Get Latest Price
This machine is a compact single head PET bottle Soda/Soft drink filler. It is a counter pressure filler. It can be installed on a table top or a bench. It is an easy to use machine. A production of about 3-4 bottles can be done per minute. The machine is connected to a Carbonator with the help of connecting pipe provided. Soda flows from the Carbonator to the tank of the machine where it is stored. The tank is fitted with a pressure gage to monitor the gas pressure and a safety release valve. An automatic air relief valve is provided to relieve air from the tank from time to time. A gage glass tube is provided to check the level of soda in the tank.
A special locking type clamp is fitted on the machine. The bottle is first placed by its neck on the bottle holding plate. In case of glass bottles, a bottle table is provided. Then the locking clamp lever is lifted up and locked into position. The bottle goes up in to the filling head. A small L Type Lever provided in front of the tank is turned to start the counter pressure and automatic filling. Once the filling has reached the nozzle, the L Lever is turned back into the lock position. Then the snift lever in front of the tank is pressed to release excess ressure and the bottle can be taken off for capping. It is an easy machine to use with very little maintenance and with minimum loss of carbonation during filling hence ensuring a strong soda. To make soft drinks, the bottles are pre-filled with the required syrup flavor.
(Machine can also be used for glass bottle with minor alterations)
Ultra Violet Water Filter System is ideal for filtration of water. It is generally used for filtration of Bore well and Well water. It is a 3-in-1 filter system. It has a 10 micron filter cartridge which removes all visible dust particles. The water then flows through an activated Carbon Cartridge which removes chemicals and odour. Then the water flows through the UV chamber where two UV lamps are provided. They help to eliminate bacteria, germs, pathogens etc. The filter can process about 500 litres of water per hour. It can be connected to an overhead tank and the water will flow through it by gravity. There is no need for pumps. It is wall mountable and easy to assemble. It requires very little maintenance and is user serviceable. It is an ideal unit for Soda / Soft drink makers, juice processing factories, hostels, hotels, etc. and wherever bulk drinking water is required.
