Soda Machine

Product Details:

Goli Bottle Filler is a simple easy to use machine to make Goli Soda. This is a single head filler.

The Goli Soda Filler is connected to a Carbonator with the help of a hose provided. One Goli Soda Bottle is kept between the filling head & bottle table by pressing the long lever. It is held there by a spring. The filling head is turned upside down & the filling lever is pressed. Once the bottle is filled, the bottle is taken off by pressing the long lever again.

The Goli Soda Machine requires very little maintenance restricted to change of head washer & orings inside the filling head. This can done by user.

About 6-8 bottles can be filled per minute depending on the speed of the operator. A shift valve is provided to release excess pressure to reduce bottle breakage. A half round cover is provided to avoid injury to operator due to bottle breakage during filling.

The stand of the machine is MS (powder coated) and all contact parts of the machine are SS 304

Additional Information:

• Production Capacity: 6 to 8 per minute
• Delivery Time: 15 to 20 Days

Product Details:

This is a unique one of its kind semi automatic rotary filler machine for CODD bottles. The speciality of the machine is its rotary motion which fills the bottle and automatically locks the ball immediately after filling is over.

It is a sturdily built machine and fabricated fully of SS 304. The machine has a rotating plate on which nine filling heads are fitted. Two people are required – one for keeping the bottle on the bottle table when the head is in upright position and one for removing the filled bottle after one revolution. The bottle clamping and filling are pneumatically done and so an air compressor of 3 HP is required. A control panel is provided with a RPM control so that the rotation can be slowed down or speeded up as required. An emergency switch is provided for immediate stopping of the rotary plate.

Each filling head is housed in a stainless steel cover. The front & side covers of the machine are also designed so that it is easy to keep and take off the bottles from the rotating plate.

Both these provisions also ensure that the operators are not injured if a bottle breaks. In case a bottle does break during filling, the machine can be stopped for a few seconds and the head can be cleaned. The machine can be resumed quickly. Each filling head is provided with a seperate air valve which can be shut off in case the head requires some maintenance. In the meanwhile the machine can continue to be used. A connection is provided behind the machine to connect it to the carbonator. An FRL is also provided for setting the correct air pressure. The machine has a 1 HP III ph motor and suitable gear box.