|Printing Batch No||Pkd., Exp., MRP, Net Wt., Qty, Size, etc.|
|Printing Surface||Flat, round, curved, bottom, etc|
|Printing material||Plastic, metal, films, polythene, hdpe sacks, ceramic, glass, etc.|
|Printing Product||Bottles, jars, pouches, labels, laminated cartons, tins, cups, etc|
|Flow Rate||3000-4000 m^3/hr|
|Pressure setting||1-9 bar|
The filter press is an ideal equipment for filtering the sugar syrup. It is portable and easy to use. Available with optional heating arrangement by boiler & steam jacketted kettle. The filter press is available in a wide range of output capacities & sizes.
|Pressure||Up to 0.7 MPa|
This unit is used for determining the ‘Gas Volumes’ of a soda/soft drink. ‘Gas volume’ is a unit determined by the pressure inside a bottle and the temperature of the liquid. The Gas Volume Tester is basically a quality-checking unit. One or two bottles are taken out from the production line at regular intervals and gas volumes checked. A thermometer is also required. The Tester is first clamped on the bottle to be checked. Then the bottle is punctured with the spindle by rotating the knob and the pressure noted on the pressure gauge. The Tester is then removed, bottle opened and the temperature of liquid checked. Both values are noted and the ‘gas volumes’ found by referring chart provided. Soda and various soft drinks have varying ‘gas volumes’ and the values have to be adhered to get the best quality.
|Minimum Order Quantity||1 Number|
|Cooling Capacity||2 to 4 Degrees|
|Body Material||Stainless Steel|
|Chilled water flow||200 to 750 ltr per hour|
Chilled water is an absolute necessity for soda/soft drink making ensuring better carbonation. MGI Chilling plant is ideal for cooling water from ambient/room temperature to about 4-5 degrees Celsius. It is designed for efficiency to save on power and temperature loss. It has a refrigeration system and cooling tank consisting of an inner tank made of stainless steel and an outer MS tank. Sufficient insulation is done between them to prevent loss of temperature thus improving the efficiency of the Chiller. Water inlet and outlet connections are conveniently provided for easy installation and piping. A temperature indicator is also provided to monitor outlet temperature. The Chiller is available in various capacities. Its size, shape & type may vary according to its capacity & may not be as per the photo shown here.
|Motor Power||0.25 Hp|
|Production capacity||12-15 bottles per minute|
|Motor Guaranteed||1 year|
“MGI” PET Bottle Capping Machine is most ideal for capping Mineral Water Bottles, Soda / Soft Drink Bottles or any plastic bottles. The machine is of simple construction, robust and very easy to use. It consists of a 1/4 Hp motor with gear box mounted on a M. S. stand. Special capping die is fixed on output shaft of gear box. The die consists of a bush with knurling, which grips the outer of the plastic cap. When the motor is switched on, the die rotates at a speed of 100 rpm. The cap is placed on the PET bottle to be capped. The foot is pressed and the bottle is placed on the neck holding arrangement provided. Now the foot is released thereby pressing the cap into the bush. The cap rotates along with the die and is thus tightened. Once the cap is tight, the bush slips with the help of a ratchet arrangement ensuring that the plastic cap is not damaged. After the capping is over, the bottle can be removed by pressing the foot.