Capping Machines

The simple to use aerosol can crimping machine  offered by us is designed, developed and fabricated using superior quality material with advanced technology. It is in compliance with set industrial quality standards and is appreciated for quick setting crimp diameter and crimp depth. The cap to be crimped with the valve is placed on the mouth of the filled can and the handle is then pressed to crimp the can. The height adjustment is made according to the height of the can.

• This machine is used for crimping Aerosol Cans.
• It is a simple machine to use.
• The cap to be crimped with the valve is placed on the mouth of the filled can.
• The height adjustment is made according to the height of the can.
• The handle is then pressed. The Crimping Collet opens and crimps the cap.
• The crimping takes place and the can is removed from the machine.
• Any Can may be crimped. But the Crimping Collet must be designed according to size.
• An average production of about 6 Cans per minute can be achieved.However, this depends on the dexterity of the operator.

We are engaged in manufacturing the PET bottle capping machine  that consists of a stand mounted with motor and attached with gear box. The capping die automatically holds the cap and the rotating die tightens the cap on the bottle. Manufactured using superior quality material, the machine is in compliance with set international standards. Tested on various quality parameters, the machine is also custom designed as per the detailed specifications given by client.

• The Capping Machine is used for capping of PET bottles.
• Any PET bottle can be capped. However the capping die may vary according to the cap diameter.
• The machine basically consists of a stand on which is mounted a ¼ HP motor with an attached gearbox.
• The capping die is fitted on the output shaft of the gearbox. The die rotates at an approximate speed of 70 RPM.
• A stainless steel plate set is mounted below the rotating die on which the bottle to be capped is held.
• After the PET bottle is filled with whatever is required, the cap is placed on it and the bottle is kept on the bottle holding plate on the machine by pressing the foot pedal.
• The capping die then automatically holds the cap and the rotating die tightens the cap on the bottle.
• After the cap has fully tightened on the bottle, the die slips in the holder and then the bottle is taken out. This whole operation takes about 4-5 seconds depending upon the dexterity of the operator.
• The advantage of the machine is that all the bottles are evenly tightened and operator fatigue is low. The amount of tightness required can be adjusted with the help of spring-loaded ball provided.
• About 10 bottles can be capped per minute.

Our clients can avail from us a range of crown corking machines  that are ideal for crown capping glass bottles. The machine is available in hand, foot and pneumatic models and is suitable for capping bottles of any size. Easy to install and operate, the range is appreciated for high tensile strength, dimensional accuracy and low maintenance. Available in various technical specifications, the machines are also customized as per the requirements of clients.

• The Crowning machines are ideal for crown capping glass bottles.
• One crown cap is first inserted into the Crowning head
• Then the bottle is placed on the bottle table.
• The The Hand lever or foot pedal is then pressed for capping.
• The machine is available in Hand, Foot and Pneumatic models.
• About 250-300 bottles can be capped per hour depending on the dexterity of the operator.
• Any size bottle can be capped.

We are engage in offering motorized newman cap sealer that is sturdily designed and developed using superior quality material in accordance with set industrial standards. Easy to install and operate, the machine is appreciated for compact design, dimensional accuracy, low maintenance and trouble free operation. Owing to these qualities, it is extensively used in soda, soft drinks & beverage industry, food processing industry and packaging industry.

• Sturdy Construction.
• Easy operation and maintenance. No skilled labour required.
• Low power consumption

This machine is designed to produce perfect threading and sealing of pilfer proof caps used mainly in the food and pharmaceutical industry.

The construction and working being being very simple, it demands very little skill of operation. The bottle is placed on the pressing pad along with its cap. This is then pressed against the mandrel by the operation of the compression spring handle. On operating the crank lever, the bottle along with  the cap rotates. Sealing and threading is achieved by rotating the crank lever anti clockwise and pressing the sealing and threading disc holder on the cap.

Specifications:

Blank

Capacity	600 seals per hour
Sealing sizes	22mm to 58mm dia. caps
Bottle sizes	25mm to 400 mm high
Dimension-Table Model	280mm x 330mm x 762mm
Weight	14kgs. approx.

"MGI" Brand Twist Off Lug Cap Sealing Machine is a compact light weight Pneumatically / Manually operated machine. It is portable and of study construction.

It can be used for capping bottles of Pickles, Jam, Sauces, Juices, etc. Bottles of various mouth sizes can be sealed.

The method of operation is simple. Filled bottles with cap on top is placed on the bottle table. Pneumatic foot switch or hand lever is pressed. The capping head presses on the cap. Capping handle is turned 45 degrees for capping. A production of about 5-6 bottles per minute can be achieved depending on the dexterity of the operator.

When the machine is pneumatically operated, an air compressor is required. The machine is available as a table top model or with stand if required.

The salient features of the machine are:

• Convenience of usage
• Minimum maintenance
• Good quality pneumatic spares used for longer life
• Contact parts are stainless steel
• Easy availability of spare parts and therefore lesser downtime
• Is light weight and easy for transportation.

Unique Features:

An indispensable tool for Hospitals, Research Institutes, Ayurvedic Concerns, Pharmaceutical Industries & Allied Traders.

• perfect & tight vial sealing.
• Smooth operation.
• It can be used for either small or large production.
• Strongly built body & light in weight.
• Hardened working parts.
• Available in mild steel - chrome plated body as well as in stainless steel body.
• Very simple operation.
• The machine can be held in the hand very easily in it's open position.
• Also available in semi-automatic model with production of 40-50 seals per minute.

Operation:

First let the upper arm be free by removing the clip over it. Now the tool is in it's original condition with the open jaws. Insert the vial / bottle, with the aluminium cap over it, in the open jaws and press the arms. Please do not exert excess pressure.

Adjustment:

Remove the upper handle by taking out the small pin. You will find there, a flattened pin. If the sealing is not tight, rotate (half or full turn) this pin in anticlockwise direction. If the sealing is too tight, causing depression on the sides of the aluminium seal, rotate (half or full turn) this pin in clockwise direction.